Color restorer for plastics and gelcoats

PROPERTIES

  • Restores original color and dries out to a tough flexible finish.
  • Long lasting and penetrates deep into gelcoat.
  • Eliminates the need for waxes and polishes that sit on surfaces and dry out quickly.

SURFACE PREPARATION

  • Rinse the surface with fresh water.
  • Remove dirt and heavy oxidation by scrubbing with DECK CLEANER per label instructions.
  • Allow surface to completely dry.
  • Do not apply in direct sunlight.

APPLICATION

  • Use as is, do not thin. Saturate a SOFT cloth with GELCOAT RESTORER and wipe it on.
  • With a SOFT cloth, wipe off excess within 5 minutes.
  • Gently polish with a lint-free cloth to a new sheen.

TIP

  • Choose an area that can be managed within five minutes.
  • Excess Gelcoat Restorer that dries on the surface may be removed with MARINE STRIP per label instructions.

NOTE

  • Rags soaked in GELCOAT RESTORER may spontaneously catch fire if improperly discarded.
  • Rags must be saturated with water after use or placed in a sealed, water filled metal container, before disposing with household waste.

Information :

Coverage : 18m²/l - 194 sq/ft
Application tools : Brush - Rag
Application temperature : +41°F to +95°F
Working time before wiping: 10-20 min.
Clean-up : Mineral-Spirits

Container size :

0.5 LITER (0.53 U.S QUART)
1 LITER (1.06 U.S QUART)
© DURIEU group - Z.I La Mariniere - 2 bis rue Charles de Gaulle - B.P 75 - 91072 BONDOUFLE Cedex - FRANCE - TÚl.: +33 (0) 160 86 48 70 - Fax : +33 (0) 160 86 84 84 - Legal notices