Fender cleaner & black mark remover

BLACKBAT 2 in 1 is a fast acting cleaner for fenders, inflatables, hulls, decks etc. Easy to use BLACKBAT 2 in 1 removes tough marks and stains in just a few minutes so restoring the surface to its original condition.


  • Quickly and thoroughly eliminates marks and tough stains caused by:
    - Air pollution, Bad weather, Rubbing marks from docks, Footprints...
    - Exhaust stains, Grease, Tar, Salt, Sail and smoke marks ....
  • Double action - Cleans and degreases in one
  • Extremely powerful degreasing formula. Restores treated surface to its original condition.
  • Enriched with pine oil for optimum performance on oil residues.
  • Fast acting. Quick and easy to use.
  • Does not alter or damage the surface.

Where to use

  • Exterior
  • Fenders, Inflatables (PVC, Hypalon, Neoprene). Vinyl and artificial leather.
  • Hulls, Superstructures, Decks, Anti-slip surfaces, Transoms, Exhaust pipes....
  • Painted, metal, gelcoat and PVC surfaces.

Preparation surface

  • Do not apply in direct sunlight or to hot surfaces.
  • Apply between 10°C (50°F) and 30°C (86°F).
  • Do not use wire brushes to scrub the surface.
  • Protect surfaces you do not wish to treat.
  • Always test on a small inconspicuous area first.
  • Avoid prolonged contact with the substrate.
  • Use appropriate protective clothing - Gloves, Goggles...


  • Apply BLACKBAT 2 in 1 to the surface using a brush or sprayer.
  • Allow to work for 5 minutes.
  • Rub surface with a clean cloth or scrubbing sponge.
  • Rinse with fresh clean water.
  • Repeat process if required.


  • Water
  • Note: Cloths soaked in BLACKBAT 2 in 1 should be laid out flat to dry before disposing.

To maintain product

  • Store left over product in original container.
  • Close lid tightly after use.
  • Keep from freezing and high temperatures.


  • For very dirty surfaces soak cloth or scrubbing sponge in BLACKBAT 2 in 1 and scrub on to surface in a circular motion.
  • If surface is too hot, dampen with water to cool before applying BLACKBAT 2 in 1.


  • Coverage: N/A
  • Application tools : Brush - Cloth - Scrubbing Sponge - Sprayer
  • Application temperature : between 10°C (50°F) and 30°C (86°F)
  • Working time : N/A

Container size

  • 1 LITER (1.06 U.S QUART)
  • 2.5 LITERS (0.66 U.S. GALLON)

Watch the product video