Paint & antifouling stripper

MARINE STRIP is a powerful, water washable solvent free paint stripper that will remove oil and alkyd based paint, varnish, woodstain and anti-fouling. Requiring no supervision or immediate removal of the softened coating, MARINE STRIP strips up to 8 coats of finish in one application.
Suitable for virtually any surface including wood, metal, plastic and GRP, MARINE STRIP's gel consistency means it will not run, making it ideal for vertical surfaces. Easy to apply, MARINE STRIP dissolves paint in the smallest recess, softening all accumulated layers for simple, clean removal. VOC free and non flammable, MARINE STRIP is safe to use in poorly ventilated or confined areas.


  • Solvent free - No toxic fumes.
  • Easily removed with water.
  • MARINE STRIP is safe on all surfaces except Aluminium.
  • Does not harm plastic. Safe on Gelcoat.
  • Removes up to 8 coats of paint in one operation.
  • Does not evaporate - Long active work time.
  • Easy to apply Gel - Does not run.

Where to use

  • For exterior use only.
  • Removes varnishes, stains, paints, anti-foulings...
  • Works on metal**, wood**, plastic, gelcoat...
  • Horizontal or Vertical surfaces.

**See technical data sheet

Preparation surface

  • Remove any loose and flaking paint.
  • Brush off any physical surface contamination i.e. moss, general dirt etc.


  • Apply a thick coat of MARINE STRIP over the whole surface to be stripped. For woods rich in tannins, work large areas in zones to avoid excessive darkening of the wood.
  • Allow product to work.
  • Remove MARINE STRIP and dissolved paint with fresh water and a scrubbing brush or paint scraper, alternatively use a pressure washer (max. 60 bars / 870 psi).

NB: The use of hot water makes the job easier.

  • Thoroughly rinse the surface with fresh clean water
  • After stripping and rinsing. All porous surfaces must be immediately treated with DECK CLEANER* while still wet to neutralise the surface.
  • NB: Consult us for additional information and advice prior to using MARINE STRIP on Oak and
  • Chestnut.


  • Water


  • MARINE STRIP will not remove the following type of coatings: 2 pack or baked on paints.
  • Polyurethane paint and varnish.
  • Do not use on aluminium.


  • Coverage: 4 m² per litre
  • Application tools: Flat blade or brush with synthetic (nylon) "bristles". Pressure washer.
  • Application temperature : between 5°C and 35°C
  • Working time: N/A

Container size

  • 1 LITER (1.06 U.S QUART)
  • 2.5 LITERS (0.66 U.S. GALLON)
  • 10 LITERS (10.6 U.S. GALLON)