Anti-slip polyurethane coating

OWAGRIP is a one pack polyurethane, non-slip finish for decks and other horizontal surfaces. Containing a tough polyurethane resin OWAGRIP protects against every day wear and tear.


  • Anti-corrosive and UV resistant.
  • Specially developed for extreme weather conditions.
  • Excellent wear resistance - Double action non-slip fillers.
  • Surface filler + Base Filler = Long lasting performance.
  • Satin finish limits glare and accumulation of dirt.
  • Easily cleaned.

Where to use

  • Interior and exterior.
  • Gelcoat, New and Rusted Metal, Aluminium, Wood...
  • Previously painted surfaces - Polyurethane, Epoxy, Alkyd, Acrylic...
  • Decks, Ramps, Steps...

Preparation surface

  • Important: see technical data sheet


  • Stir product well (2 to 3 minutes) before and during application. Do not thin.
  • Apply 2 even applications of OWAGRIP.
  • Allow 12 hours minimum (20°C & 50% RH) between coats.
  • Allow last coat to dry 24 hours before putting in to use.
  • Uncoated Wooden Surfaces - Add 10% MARINE OIL* to the 1st coat of OWAGRIP.
  • Light or Moderate Rust - Add 5% to 10% MARINE OIL* to the 1st coat of OWAGRIP.
  • Aluminium and Gelcoat - A 3rd coat of OWAGRIP may be applied if required.


  • Water
  • Note: Cloths soaked in BLACKBAT 2 in 1 should be laid out flat to dry before disposing.

To maintain product

  • Maintenance is due when the anti-slip is compromised.
  • Clean surface with OWACLEAN. Rinse and allow to dry.
  • Apply 1 or 2 coats of OWAGRIP depending on condition of current finish.


  • Coverage: 9 m² (96ft²) to 10 m² (107ft²) per litre, per coat
  • Application tools: Brush, Roller - Mohair/Short pile, Not suitable for spray application.
  • Application temperature: between 5°C (41°F) and 30°C (86°F)
  • Recoat: 12 hours / Normal traffic: 5 days+

Container size

  • 1 LITER (1.06 U.S QUART)
  • 2.5 LITERS (0.66 U.S. GALLON)

Watch the product video