General Directions:
- Surfaces must be clean, dry and free of dirt, grease, grime and mildew.
- Treat mildew with a 50/50 bleach/water solution. Scrub solution on to the surface and allow to stand for 10-15 minutes; rinse thoroughly.
- DEKS OLJE D.2 may only be applied to surfaces previously finished with DEKS OLJE D.2 or DEKS OLJE D.1.
- All other finishes must be completely and thoroughly removed.
New wood:
- All new wood must be treated with DEKS OLJE D.1.
Weathered wood surfaces (untreated):
- Refer to the Technical Data Sheet for DEKS OLJE D.1
Previously oiled and coated surfaces (Paint, Stain, Varnish....):
- Refer to the Technical Data Sheet for DEKS OLJE D.1
Weathered wood previously treated with DEKS OLJE D.1:
- Clean with DECK CLEANER and restore DEKS OLJE D.1 before applying DEKS OLJE D.2.
Wood already treated with DEKS OLJE D.2:
- See technical data sheet.
- Wash frequently with fresh water to remove salt and dirt.
Areas worn back to DEKS OLJE D.1 treated wood:
- Clean worn area with DECK CLEANER. Leave to dry.
- Sand with 320 grit paper.
- Top up DEKS OLJE D.1.
- Apply required number of DEKS OLJE D.2 coats to bring up to level of existing finish.
Rough or abraded areas:
- Wet sand surface using 320 grit paper and DEKS OLJE D.1 as the lubricant.
- Wipe over with a clean, dry, lint free cloth to remove DEKS OLJE D.1 and sanding residue. Leave to dry 24 hours.
- Apply 2 coats (minimum) or more of DEKS OLJE D.2, blending in to areas with good finish.
New full coat:
- Wet sand the whole surface using 320 grit paper and DEKS OLJE D.1 as the lubricant.
- Wipe over with a clean, dry, lint free cloth to remove DEKS OLJE D.1 and sanding residue. Leave to dry 24 hours.
- Apply 1 or 2 coats of DEKS OLJE D.2 as desired.